OTHER INFORMATION (32")
6.
PIC (Picture in Computer Mode)
When you have connected the PC to TV set (in PC mode), you can open the function by pressing PR+/PR- and
you will watch programme displayed on the top right of the screen.
The picture size is not adjustable, you may move the picture position from top right, top centre, top left, middle
left, bottom left, bottom centre, bottom right, middle right by pressing the Ÿ / ⁄ key.
The sound will always come from the programme inside the PIC no matter whether the PC is playing video file;
however, inside PIC there is no overview function for it but you can change the video input type such AV1,
AV2, AV2-S etc.
You may choose the TV channel by pressing numeric number (0-9).
You may choose the AV programme by pressing AV button.
Sockets
: at the bottom of the TV back side (From right to left)
SCART 2 AV2 / AV2-S (input-output) the same with SCART1
This socket can be used to connect a range of equipment, including video recorders,
camcorders (VHS, 8-mm, S-VHS or Hi 8 format), satellite receivers, DVD players,
games consoles.
To display images from the connected appliance, select AV2 using AV button on the remote
control.
For some appliances (connected to the SCART socket), this selection is made automatically.
For appliances producing S-Video signal, select AV2-S.
SCART 1 AV1 / AV1 RGB (input-output)
This socket can be used to connect a range of equipment, including video recorders,
camcorders (VHS or 8-mm), decoders, satellite receivers, DVD players, games
consoles or appliances producing an RGB signal.
To display images from the connected appliance, select AV1 using AV button on the remote
control.
For some appliances (connected to the SCART socket), this selection is made automatically.
For appliances producing an RGB signal, select AV1 RGB.
RF signal (Input) for the TV antenna or cable system using defined broadcasting
standards such as BG (Euro), LL' (FR), I (UK) and DKK'(DK).
Audio stereo jack socket (output) This can be used to connect a stereo
amplifier, a hi-fi system or amplified speakers (see page 25).
Audio (R/L) and video (CVBS) CINCH sockets AV3 (input)
These can mainly be used to connect camcorders (VHS or 8-mm format).
To display images from the connected appliance, select AV3 using AV button on the remote
control.
24