Table des Matières
Publicité
Setting the Preferences
The Preferences menu can be used to set your preference including Eco mode, Permanent PR, Back
light, Sleep timer, TV Lock and Language.
PREFERENCES
Return
Eco mode
Permanent pr. number
Backlight
Sleep timer
TV lock
Language
DVI input
Return : use the buttons to go back to the OVERVIEW menu.
Eco mode: When this function is on, the LCD TV will go to stand by automatically after ten minutes without
video signal. Tick the box by pressing OK to activate the function.
If in PC mode, this Eco mode selection will enable the PC power management function.
Permanent pr. number
are watching
.
If the signal source is AV, the AV OSD tag will be displayed permanently.
:
Back light
this option allows to adjust the backlight of your LCD TV.
Using the
/ ÿ buttons you can choose between Soft, Normal and Bright.
Sleep timer :
1. Select the Sleep timer option.
2. Set an automatic shut-off time (from 0 to 4 hours in 15-minute intervals) by using the
Set the time to 00:00 to disable this function.
TV Lock
This function allows the parents:
Either to lock the LCD TV set by putting it into to standby mode or to choose a programme their children will be
able to watch until the sleep timer expires.
Tick the box by pressing OK to activate the TV lock.
When you turn on the function, we suggest taking remote control away. In this case, children can only adjust the volume or
switch the LCD TV off.
Once in standby mode, TV LCD can then only be switched on using the remote control.
Language
Using the
/ ÿ buttons select your preferred language for menus.
Available languages are : English, French, German, Italian, Spanish.
DVI input
According to the device connected to the HDMI/DVI socket, select Video or PC.
Press EXIT to close the menu.
Note: pressing Zzz/List (Green) in TV mode out of the menus opens the PREFERENCES menu with the Sleep
timer line highlighted.
o
o
Normal...
0:00
o
English...
Video
:
tick the box by pressing OK to permanently display the number of the channel you
Display the OVERVIEW menu by pressing the
MENU button.
Select the Preferences option and press OK to
confirm.
The PREFERENCES menu appears. It offers the
following options
18
/ ÿ buttons.
Publicité
Table des Matières
