Adjusting The Slicing Thickness; Installing Other Slicing Or Shredding Discs - KitchenAid KFP1330 Instructions

aSSEMblINg ThE FOOd PROCESSOR
Lower the slicing blade and slicing
3
adapter onto the drive adapter.
TIP: You may need to turn the disc/drive adapter until it drops down into place.

adjusting the slicing thickness

Thinner_
Set the desired slicing thickness by
1
moving the lever to the left for thinner
slices or to the right for thicker slices.
Installing other_ slicing or_ shr_edding discs
IMPORTaNT: When using the reversible shredding disc, have the desired side
(medium/fine) facing UP .
Holding the desired disc by the 2 finger
1
grips, insert the disc adapter into the
hole in the bottom of the disc.
4
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
Thicker_
will have no effect on operation.
2
Install the work bowl cover, being sure it
locks into place.
Slide the drive adapter into the disc
adapter as far as it will go, until it clicks
into place.
11