Paradigm CINEMA 100 CT Manuel Du Propriétaire page 19

Design
Amplifier: High-current,
Discrete Output
Amplifier Features
Bass Driver
Low-Frequency Extension*
Subwoofer Cut-Off Frequency
Sub / Sat Phase Alignment Switch
Line-Level Input
Line-Level Input Sensitivity
Line-Level Input Impedance
Dimensions (h x w x d)
(gloss side up, height includes feet)
Weight (unpacked)
Finish
DIN 45 500 Indicates -3 dB in a typical listening room.
*
With typical program source, provided the amplifier clips no more than 10% of the time.
†
CINEMA SUB
™
Single driver, bass reflex,
high-velocity low-turbulence
resistive port, built-in amplifier
300 watts Dynamic Peak;
100 watts RMS Sustained
Auto-On / Standby, soft clipping
210-mm (8 in) reinforced polymer-
composite cone, 38-mm (1-1/2 in)
voice-coil
32 Hz (DIN)
Variable 35 Hz – 150 Hz;
Bypass option
0° or 180°
Two RCA (L/R-Mono) for L/R
lineout or Sub-Out/LFE-Out
of receiver/processor or other
line-level source
130 mV
10k ohms
34.2 cm x 32.2 cm x 32.2 cm
13-7/16 in x 12-11/16 in x 12-11/16 in
9.7 kg / 21.4 lb
Black Gloss
18