Remote Operation; Preparation - Comfort Glow QDE1345 Manuel Du Propriétaire

REMOTE OPERATION

PREPARATION

WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet
and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet.
Contact a qualified electrician to inspect the original outlet for damage.
Power button
Timer button: To enable and set timer
High: To set on High Heat
Low: To set on Low Heat
Energy-saving mode
Eco: To set on
WARNING: This heater has a voltage rating of 120 volts.
The cord has a plug as shown in A. An adapter as shown
in C is available for connecting three-blade grounding-
type plugs to two-slot receptacles. The grounding lug
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet
box. The adapter should not be used if a three-slot
grounded receptacle is available.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE
GROUNDED PLUG.
6