Controls; Unpacking & Installation; Electrical Hookup - Waring Commercial WCM50 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CONTROLS

Power Light
– indicates the unit is powered on
Ready Light
– illuminates when brewing
is complete
Power ON/Lower Warmer Switch
– starts brewing and
heats lower warmer
Upper Warmer Switch
– heats upper warmer
UNPACKING & INSTALLATION
CAUTION: This is a heavy piece of equipment. It is recommended
that moving or lifting the unit be done by two people to avoid injury.
Carefully unpack the machine and make sure there was no damage
during shipping. Contact customer service if you notice any issues.
NOTE: The person installing the appliance is responsible for ensuring
that electric and water connections meet the requirements of the
national electric code, national plumbing code, and any
local ordinances.

ELECTRICAL HOOKUP

NOTE: This equipment must be installed in compliance with
applicable federal, state and/or local electrical codes having
jurisdiction. Do not use extension cords. Make sure that the outlet
is properly grounded.
1. C heck rating marking on coffeemaker nameplate to be sure
electric lines match voltage, phase, and amperage requirements
of coffeemaker. Select the proper cord and cord grip for
electrical rating of the coffeemaker.
2. For U.S., 120V coffeemakers are provided with a 120V/15A
grounding plug.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wcm50Wcm50c

Table des Matières