Slow_1: Slow Mode Booting Switch - Micro-Star International Z97 GAMING 9 AC Mode D'emploi

SLOW_1: Slow Mode Booting Switch

This switch is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
Important
Users will try extreme low temperature overclocking at their own risks. The
overclocking results will vary according to the CPU version.
AUD_SW1: Audio Power Switch
This switch specifies the power mode for back panel audio ports.
Important
Before switching to "Direct Power mode", please make sure the "Direct Audio
•
Power Connector" (AUDPWR1) has been connected to the power supply.
• Do not use the audio power switch while the system is on because it may damage
the motherboard.
Normal
(Default)
Onboard Power mode
(Default)
Direct Power mode
En-30
Enabled