AVIRE MRL DCP Guide D'installation page 6

Example of an SMS (for example if the SIM card is from Vodafone):
Pin1234, P060 wap.vodafone.co.uk, P061 wap, P062 wap, P063 1
Important Note: The default PIN code for DCP is always 1234.
If either P061 and P062 is (blank) with no username and password provided (O2
Germany example) and the DCP is configured to be used with the Avire Hub, then the
text message will be:
Pin1234, P060 surfo2, P063 1
If everything is configured correctly you will receive a text within a few minutes. The
example below shows the set-up of parameters for EE UK.
OBTAINING THE CCID NUMBER
AVIRE SIM CARDS
Avire SIM cards come preconfigured to be used with our products
immediately after plugging them in. You will need to know the CCID
number to add this information to the Avire Hub.
The CCID Number is shown on the back of the SIM card and on the outer plastic case
of the SIM card (highlighted in red on the picture below).
Important Note: A CCID number consists of 19 digits.
5