S I G N A T U R E
ANTENNA
The Modulator can be controlled by the LumiPlus Remote
Control for greater user comfort.
The Modulator includes an antenna to receive the signal
from the Remote Control which can be installed anywhere
as long as it is outside of corrosive environments, outside
metal boxes and far from metal pipes or electrical cables
that block the Radio Frequency signal from the Remote
Control. The cable must be connected to the two nº 31 and
32 terminals on the Modulator.
An antenna will receive the signal from the Remote Control, transfer the signal to the Modulator,
thereby achieving complete synchronization for the entire lighting system (see attached
diagram).
Modulator - Antenna Connections:
Jelly alimentation
10