Shop-Vac AM Serie Notice D'utilisation page 3

OPERATING POSITIONS
The air mover may be set in one of two operating positions. Pick the position best suited for your
application.
1. Use the down position (Figure 7) for applications such as; drying wet floors, shampooed
carpets, etc. To use this position simply place unit on its base.
2. Use the up position for applications such as; drying paint on the ceiling. To use this position,
make sure the transport handle is secured at the lowest height. Lay the unit on the back side
with the front grill pointing towards the ceiling (Figure 8).
7
CLEANING
WARNING:
TO REDUCE THE RISK OF INJURY FROM
THE AIR MOVER ACCIDENTALLY STARTING, UNPLUG POWER CORD
BEFORE CLEANING.
The outside of the unit may be cleaned with a damp cloth to remove any dust or residue.
USER SERVICING INSTRUCTIONS
WARNING
:
BE SURE TO DISCONNECT POWER SUPPLY
BEFORE ATTEMPTING TO SERVICE OR REMOVE ANY COMPONENTS.
Do not attempt to service your air mover beyond that described in the user manual. For all other
servicing, follow instructions under Warranty Section.
LUBRICATION
No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
STORAGE
1. Before storing your air mover it should be cleaned. For cleaning instructions, refer to the
Cleaning section in this manual.
2. Wrap the power cord around the carry handle on the top of the unit to keep it untangled
(Figure 9).
3. To save space, secure the transport handle at the lowest height.
4. If you have more then one unit to store they may be stored by stacking them. Prepare the
units for storage and secure the transport handle at the lowest height. Stack the units by
placing them on their sides making sure the indented side is facing down (Figure 10). Do not
stack the units more then 4 high. Never operate the unit while it is on its side or stacked. THE
AIR MOVER SHOULD BE STORED INDOORS.
9
®
SHOP-VAC ONE YEAR INDUSTRIAL/
COMMERCIAL WARRANTY
Limited One-Year Warranty
Shop-Vac ® Corporation warrants the product contained in this package for one year from the
date of purchase to correct by repair or parts replacement without charge any product defect due
to faulty material or workmanship. Should this product be used for rental service, a 90 day limited
warranty will apply. Shop-Vac ® assumes no responsibility for damage or faulty performance
caused by misuse or careless handling, or where repairs or modifications have been made or
attempted by others. Proof of purchase date is required. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state or province to province.
Customers in the United States: for product service contact Shop-Vac Corporation, Customer
Service, at (570) 326-3557 or go to www.shopvac.com/support. Visit www.shopvac.com for your
parts list schematic.
8
10
Customers in Canada: for product service return the complete unit, (transportation prepaid), to
®
the Authorized Shop-Vac Service Center nearest you. Visit www.shopvac.ca for a complete list of
Authorized Service Centers in your area.
Customers in Mexico: for product service see paperwork that came with your unit.
3