Hornbach LUMAK PRO 10350851 Manuel De L'utilisateur page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
English
I.
1
2
3
4
5
II.
1.
2.
3.
4.
5.
Assembly instructions
Please read these instructions care-
I. Description
10
fully and keep them safe for later use!
Luminaire
1
Lens cover
2
Safety information
9
Angle fixing screws
• Electrical work and repairs must be per-
3
8
Luminaire stand
formed by a qualified electrician.
4
7
Plug adapter
• The luminaire must not be modified in any
5
Charging port
way. Risk of electric shock and accident.
6
6
USB power bank connection
• The light source and the battery of this
7
Protective cap
luminaire are not replaceable; when the
8
On/Off button
light source or the battery reaches its
9
Handle
end of life the whole luminaire shall be
10
replaced.
II. Operation
Technical data
Luminaire:
Fold up the handle 10 into basic posi-
Rated power:
1.
tion and fix its screws.
10350851
Choose the desired angle and tighten
10350852
2.
the angle fixing screws 3 clockwise.
Battery:
Press On/Off button 9 once to switch
10350851
3.
on. Press button repeatedly to reach
10350852
different levels of brightness or the
Protection class
SOS signalling mode: 25% (only
Degree of protection
10350852), 50%, 100% or SOS mode.
Colour temperature
Press again to switch the luminaire
Luminous flux:
off. To recharge see section III.
10350851
The luminaire can be used as power
10350852
4.
bank to recharge smartphones, tab-
Weight:
lets and similar electronic devices via
10350851
USB port 7. Please observe the power
10350852
bank output (see technical data).
Size:
Fold the luminaire 1 as shown to hang
10350851
5.
by the luminaire stand 4.
10350852
Plug adapter:
Input voltage
Protection class
USB power bank connection:
Output
18
• The luminaire is not intended for commer-
cial use.
• Do not look directly at the lighted lumi-
naire to avoid eye injuries.
• Do not operate work luminaire if it has a
missing or damaged lens cover.
• Never use the luminaire near flammable
surfaces or materials or volatile fluids
such as gasoline.
• Charge the luminaire only with the sup-
plied adapters. Use the adapters only for
charging this luminaire.
Used symbols
Caution: Risk to health and the
product
20 W
50 W
Class III appliance, extra-low voltage
(SELV)
3.7 V, 8800 mAh Li-ion
11.1 V, 4400 mAh Li-ion
Class II appliance, reinforced isolation
III
IP 54
Waste disposal
6500 K
The pictogram with the crossed out
dustbin points to the requirement for
2000 lm
separate disposal of electrical and
4800 lm
electronic appliances (WEEE). Electrical and
electronic appliances can contain hazardous
1.2 kg
and environmentally hazardous materials. Do
1.35 kg
not dispose of this appliance as domestic
waste. Hand it in at a collection point for
23 x 25.5 x 14.5 cm
electrical and electronic waste. By doing so,
23 x 25.5 x 14.5 cm
you will help to conserve resources and
protect the environment. For further details,
100 - 240 V
please consult your local authorities.
II
5 V, 1 A
GB
III. Charging
Caution:
1.
The luminaire can not be
charged via USB port.
Do not charge the battery
outdoors or in damp environ-
ments.
Only charge with the original
adapters.
Ensure charging port is sealed
before use.
Do not use outdoors or in
3
damp environments with con-
nected power adapter.
Open the protective cap 8 and
1.
insert the charging cable.
Connect the adapter 5 to a suitable
2.
power socket (see technical data).
The battery charging time is 4 to
5 hours.
Close the protective cap 8 firmly
3.
after charging.
Work time:
3 hrs at 100% brightness; 5 hrs at
50%; 15 hrs at 25% (only 10350852)
IV. Maintenance and care
Cleaning
Wipe the luminaire with a soft, dry
cloth only. Never use scouring powders
or chemical cleaning agents.
19
III.
2.
IV.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lumak pro 10350852

Table des Matières