afriso Unitel Notice Technique page 39

5.3 Mounting the pressure line
A
A. Sampling line
B. Euroflex 3
C. Measuring line
D. Condensate trap
If no connection thread is available on the tank, several lines can be con-
nected via the combination fitting "Euroflex 3" to a single G1 connection
thread.
1. Mount the vertical line in the tank in such a way that the lower end of the
vertical line is approximately 20 mm above the lowest point of the tank
bottom.
2. Install the measuring line with a steady gradient towards the tank, avoid
bends.
3. Push the screw connection onto the measuring line.
Mounting
B
C
C
F
G
D
E. Unitel
F. Standpipe
G. Bottom part
E
D
E
Unitel
EN
14