General Maintenance; Model And Serial Number; Specifications - Allmand Night-Lite E-Serie Mode D'emploi

Avec manivelle manuelle
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Operating a machine with worn, dam-
aged or missing parts can result in
death or serious injury. Always replace
worn, damaged or missing parts
promptly. Do not operate this machine
until all worn, damaged or missing
parts have been replaced, and proper
operation of the machine has been
verified.

General Maintenance

1. Inspect the light tower mast, cables,
light fixtures, frame, and all compo-
nents for wear, damage or corrosion.
Repair or replace as needed.
2. Check to be sure all hardware is
securely tightened.
3. Inspect the wheels for wear or dam-
age. Replace as needed.
4. Inspect the outrigger bars, stabilizer
jacks and locking pins for proper
operation, and for wear, damage or
corrosion. Replace as needed.
Cleaning
WARNING
Burn Hazard
• Shut down the lights and allow
ample time for components to cool
before cleaning the unit. Failure to
do so could result in serious burns.
NOTICE
Use caution when using compressed
air or water / steam pressure washers.
Do not pressure–clean electrical com-
ponents, as this may cause damage.
• Clean the portable light tower to
remove all dust, dirt or other foreign
material.
• Clean the light fixture assemblies with
a damp cloth or sponge.
18
• Clean all electrical wiring and com-
ponents by hand using non-corrosive
cleaner.
• Open the control panel door and
clean the control panel.

Model And Serial Number

Model and serial number information is
required for product support and repair
parts. The serial number plate for the
portable light tower is located on the
unit base.

Specifications

Overall Dimensions
Length (Transport
position)
Width (Transport
position)
Height (Transport
position)
Ground Clearance 6 in (15,2 cm)
Height (Tower
Extended)
Width (Outriggers
deployed)
Length (Outriggers
deployed)
Unit Weight
Wind Speed
Frequency (Hz)
Volts
Amps
Minimum Heavy Duty Cord Sizes
0-50 ft (0-15 m)
51-100 ft (15-30 m)
101-200 ft (30-60 m) 10 ga (5,26mm 2 )
45 in (114,3 cm)
32 in (81,3 cm)
87.5 in (222 cm)
265 in (674 cm)
64 in (162,6 cm)
70 in (177,8 cm)
670 lbs (304 kg)
50 mph (80 km/h)
60
120
8.5
14 ga (2,10mm 2 )
12 ga (3,31mm 2 )
www.allmand.com

Publicité

Table des Matières
loading

Table des Matières