21 - Door Locking System (only available in some models)
Automatic door locking during pyrolytic cycle
For safety reasons, the door is locked automatically as soon
as self-clean mode is selected (both standard, both eco
clean). The door is also unlocked automatically when the
clean time has expired but only after the temperature has
fallen below the safety threshold.
NOTE It is not possible to exclude the door locking device
during self-cleaning i.e. manually unlock the door
since the self-cleaning mode has the highest priority
and overrides all other selections.
The lock symbol (
) on the display is:
When the door is fully locked
ON
When the door is fully unlocked
OFF
When the latch mechanism is moving or
FLASHING
is waiting for a command by the electronic
control. or is waiting for a command by the
electronic control. (After self clean the symbol
will flash until the temperature will be safe and
the door unlocked).
Do-it-Yourself Maintenance Oven Door Removal
WARNING
• Make sure oven is cool and power to the oven has been
turned off before removing the door. Faiture to do so
could result in electrical shock or burns.
• The oven door is heavy and fragile. Use both hands to
remove the oven door.
The door front is glass. Handle carefully to avoid
breakage.
• Grasp only the sides of the oven door. Do not grasp
the handle as il may swing in your hand and cause
damage or injury.
• Faiture to grasp the oven door firmly and properly could
result in personal injury or product damage.
To Remove Door
1. Open the door completely.
2. Lift up the hinge bracket (1).
3. Hold the door firmly on both sides using both hands and
close the door.
4. Hold firmly; the door is heavy.
5. Place the door in a convenient localion.
To Replace Door
1. Insert the upper arms (2) of both hinges into the slots (3).
The recesses (4) must hook on the lips (5).
2. Move the hinge brackels (1) back down into position.
3. Close and open the door slowly to assure that it is
correclty and securety in place.
1
2
4
3
5
EN
1
33