Throttle Lever; Self-Propulsion - IKRA BRM 1446 SN TL Manuel D'utilisation

3. Pull the brake bar towards the handle and pull on the
recoil starter handle to start the engine (Fig. 19).
Fig. 19
4. Fit the recoil starter into the rope guide on the right
hand side of the upper handle during operation (Fig.
20).
Fig. 20

3.5 Throttle lever

(BRM 1448 SSM TL)
The throttle lever is located on the top side of the upper
handle bar. It is used to control the engine speed
1. Move the throttle lever downward
the speed (Fig. 21).
2. Move the throttle lever upward
speed (Fig. 22).
GB | Operating Instruction
Fig.
Fig. 22 (minimum speed)

3.6 Self-propulsion

Use the self-propelled function as assistance during op-
eration; the rear wheels are automatically driven by the
engine; you do not need to push the machine manually.
1. Pull the drive bar towards the handle to engage the
2. Release the drive bar to disengage the wheels.
Fig. 24
to increase
to decrease the
13
21
(maximum speed)
wheels (Fig. 24).