Midland H9 Manuel D'utilisateur page 19

2.4GHZ WIRELESS REMOTE CONTROL
Photo button Video button
VIDEO MODE
Video
Verify that H9 is in Video mode.
To start recording press the grey (Video) button. H9 will emit 1 beep and the blue led of the
camera will flash while recording.
To stop recording press the grey button again. The led will stop blinking.
PHOTO MODE
Photo
To capture a photo, verify the camera is in Photo mode.
To take a photo press the red (Photo) button. H9 will emit a shutter sound.
BURST
Burst
To capture a Burst series, verify the camera is in Burst Photo mode.
To take a burst series, press the red button. H9 will emit shutter sounds.
TIME LAPSE VIDEO
TL (Time Lapse) Video
To record a Time Lapse video, the camera must be set in TL Video mode.
To start recording press the grey button. H9 will emit 1 beep and the blue led of the camera
will blink while recording.
To stop recording press the grey button again; the led will stop flashing.
19