Leviton PK-A3213-10-02-0A Manuel D'installation Et Guide De L'utilisateur page 16

4 GENERAL METERING FEATURES AND FUNCTIONALITY
Screen ID Description
d Manufacture date code: six digits in the format YYMMDD.
E Single/dual element option: display shows "1 ELt" for single-element option
or "2 ELt" for dual-element option.
o Mechanical counter output resolution option: display shows "cnt 0.1"
for 0.1 kWh option or "cnt 1.0" for 1 kWh option.
C CT amperage rating: display shows "100:0.1" for 100A CT
or "200:0.1" for 200A CT.
S Serial number, first part: display shows the first six digits of the meter's serial
number.
n Serial number, second part: display shows the last six digits of the meter's
serial number.
r Software revision code: three digits in the format N.nn, where N is the major
revision and nn is the minor revision.
8 Test display: all LCD segments are turned on for verification.
Screen ID Description
1 Real energy delivered (kWh). For kWh totals less than 100,000 the display
shows two decimal places (e.g., 123456.78). Between 100,000 and 999,999
kWh, the display shows one decimal place (e.g., 987654.3). At 1,000,000 kWh,
the display rolls over and begins counting again at 0.00 kWh.
2 Maximum demand (kW). See Section 0 for details.
3 Instantaneous power (kW). This screen is displayed only for the first 24 hours
after power up and while the meter is in an error condition to assist in verifying
correct meter installation.
4 Error code. This screen is displayed only when an error condition exists
(see Table 7).
Meter Status
NORMAL, first 24 hours after power up
NORMAL, after first 24 hours
ERROR, anytime
Startup Screens
Runtime Screens
Table 5 - LCD Screens and Sequences
Table 6 - LCD Runtime Screen Display Cycle
13
Runtime Screen Display Cycle
1, 2, 3, repeat
1, 2, repeat
1, 4, 2, 4, 3, 4, repeat