Quick Installation - Tripp-Lite SMX Serie Guide De L'utilisateur

Quick Installation

For All Models—Plug your UPS into a
1
3-wire grounded, 230V AC 50/60 Hz utility
outlet.
For SMX Models Only:
After you plug the UPS into a live AC outlet, the UPS will
automatically charge its batteries, but will not supply power
to its outlets until it is turned ON (see Step 3 below). The
BATTERY CHARGE LED will be the only LED illuminated.
For OMNIX Models Only:
Your UPS will run a self-test after it is plugged in. See Basic
Operation to understand the results of its self-test.
2 For All Models—Plug your equipment into
the UPS.*
* You will overload the UPS if the total VA ratings for all the
equipment you connect exceeds the UPS's Output Capacity (see
Specifications). To find your equipment's VA ratings, look on their
nameplates. If the equipment is listed in amps, multiply the number
of amps by 230 to determine VA. (Example: 1 amp × 230 V = 230
VA). If you are unsure if you have overloaded the UPS's outlets, see
"OUTPUT LOAD LEVEL " LED description.
Note: UPS system will function properly upon initial startup; however,
maximum runtime for the unit's battery will only be accessible after it
has been charged for 24 hours.
3 For SMX Models Only—Turn the UPS ON.
Press and hold the "POWER" button for one second. The
alarm will beep once briefly after one second has passed.
Release the button.
For OMNIX Models Only—Select UPS
Operating Mode.*
Press the UPS/STANDBY button to toggle your UPS between
the UPS ("POWER" LED lit) and the STANDBY ("POWER" LED
flashing) modes. Choose the operating mode based on your
location:
Western Europe:
• Leave the UPS in the UPS mode at all times.
All Other Countries:
• Put the UPS in the STANDBY mode when you are not
using connected equipment.
(WARNING! When set to "STANDBY," the UPS will not
provide battery backup during a blackout or brownout.)
• Put the UPS in the UPS mode when you are using
connected equipment.
* See Basic Operation section for a complete explanation of each mode.
15-08-266-9333A2.indb 6
1
2
3
6
NORM DELAY
9/9/2015 2:00:17 PM