LF MATIC AUTOTROL 460TC Mode D'emploi page 11

INSTRUCTIONS FOR USE
 DESCRIPTION OF AUTOTROL 460TC TIMER
The system has a valve with a timer where all operation controls are located.
Controls
A - Led light on indicator of PM day time
B - Hour Time Display
C - Access Door
D - Raised Tab
E - Jumper
F - Spare Jumper
G - Transformer Plug Receptacle
H - Time Set Button
I - Timer locking pin
L - Indicator Knob
 SETTINGS
Plug the wall-mount transformer into a functioning electrical outlet that is not controlled by a switch.
Plug the transformer into the transformer plug receptacle on the control.
Open the access door by pushing the raised tab on the door toward the left while pulling the tab out
(Figure 1).
Once the current time has been set, the timer will automatically start regeneration on the selected days at 2
am. In order to perform regeneration at different times from the settings, it is necessary to advance/forward
the displayed hour from the current time.
If you want to calculate regeneration frequency, see the following chart, taking into account water hardness
and daily consumption.
MODEL
MATIC 5
MATIC 8
MATIC 12
MATIC 16
MATIC 20
Water softener MATIC with AUTOTROL chronometric head 460TC
Fig. 1
L RESIN
30°F
CONTAINED
SERIES 4 L
SERIES 6 L 1000
SERIES 8 L 1350
SERIES 13 L 2150
SERIES 15 L 2500
40°F
666 500
750
1000
1620
1870
50°F 60°F
400 330
600 500
800 650
1300 1080
1500 1250
9