Technical Information; Maintenance; Technical Specifications - Chauvet DJ Obey 40 D-Fi 2.4 Manuel D'utilisation

6. T
ECHNICAL

Maintenance

Technical
Specifications
Obey 40 D-Fi 2.4 User Manual Rev. 4
I
NFORMATION
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency. As a
general rule, fixtures should be cleaned at least twice a month. Dust build-up reduces light
output performance and can cause overheating. This can lead to reduced lamp life and
increased mechanical wear. Be sure to power off fixture before conducting maintenance.
1. Unplug product from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on external
vents.
3. Clean all lenses when the fixture is cold with a mild solution of glass cleaner or isopropyl
alcohol and a soft lint-free cotton cloth or lens tissue.
4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
5. Gently polish optical surfaces until they are free of haze and lint.
Always dry the parts carefully after cleaning them.
WEIGHT & DIMENSIONS
Length
Width
Height
Weight
POWER
Input Voltage
External Power Supply
INDOOR/OUTDOOR
Rating
THERMAL
Maximum ambient temperature
CONTROL & PROGRAMMING
Data output
Data pin configuration
Total DMX control channels
ORDERING INFORMATION
Obey 40 D-Fi 2.4
Item Code
WIRELESS
Operating Frequency
WARRANTY INFORMATION
Warranty
19 in (483 mm)
3.5 in (89 mm)
6.7 in (171 mm)
5.7 lb (2.6 kg)
9 VDC, 500 mA
100–240 VAC, 50/60 Hz
For indoor use only
104 °F (40 °C)
3-pin XLR
pin 1 ground, pin 2 (-), pin 3 (+)
192
OBEY40DFI2.4
09080697
2.433 to 2.48 GHz
2-year limited warranty
Page 39 of 177