Dmx Cabling; Dmx Cabling Diagram; D-Fi Communication; D-Fi Diagram - Chauvet DJ Obey 40 D-Fi 2.4 Manuel D'utilisation

DMX Cabling

DMX Cabling
Diagram
D-Fi
Communication

D-Fi Diagram

Page 22 of 177
DMX cabling can be used along with D-Fi transmission, or instead of D-Fi transmission, for products
that are not D-Fi compatible. To use DMX cabling connect the DMX cable from DMX Out of the
board to DMX In of the first product in the rig.
Then connect another DMX cable from DMX Out of the first product in the rig to DMX In of the next
product.
Continue connecting until all the products are connected.
DMX DMX
In Out
1st Product
D-Fi communication can be used alone, or incombination with DMX cabling. Products that are
D-Fi compatible receive D-Fi signal directly from the Obey 40 D-Fi 2.4, and products that require
DMX cabling can be connected to D-Fi distribution products, such as D-Fi Hub and
D-Fi Stream 6 which receive the D-Fi signal and send it out via DMX cables.
Products that require DMX cables can also be connected directly to the Obey 40 D-Fi 2.4 as shown
above in DMX Cabling Diagram.
D-Fi Compatible
Products
Obey 40 D-Fi 2.4
DMX DMX
In Out
2nd Product
DMX DMX
In Out
3rd Product
Products Requiring
DMX Cables
D-Fi
Distribution
Product
Obey 40 D-Fi 2.4 User Manual Rev. 4
Additional
Products