Back Panel View; Back Panel Ports; Dmx Polarity - Chauvet DJ Obey 40 D-Fi 2.4 Manuel D'utilisation

Back Panel
MIDI Control

DMX Polarity

Strobe Control Out Fog Control Out
View
Power Switch
In
Switch
DMX Control Out
DC Power In

Back Panel Ports

Port Function
MIDI Control In 5-pin MIDI port for connecting to a MIDI board.
DMX Polarity Switch Toggle switch for changing DMX polarity.
Strobe Control Out ¼-inch mono port for connecting to one or more strobes in a daisy chain.
Fog Control Out
5-pin DIM port for connecting to one or more fog machines.
Power On/Off switch Toggle switch that turns the Obey 40 D-Fi 2.4 on and off.
DMX Control Out 3-pin DMX port for connecting to the products.
Power DC In External PSU port that connects to the power source.
DMX Polarity
All Chauvet lights use a negative pin 2 and positive pin 3, so the polarity switch should be set as
shown above and in

Back Panel View

(towards the DMX Control Out port). Other manufacture's
products might be different. See the individual product's User Manual for specific information
For more information about DMX, download the DMX Primer from www.chauvetlghting.com.
Page 18 of 177 Obey 40 D-Fi 2.4 User Manual Rev. 4