AFG 7.3AU Manuel Du Propriétaire page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.3AR ASSEMBLY STEP 3
10
7.3AR
6
11
5
NOTE: Be careful not to pinch any wires while attaching the console.
12
AFG14_7.3AR_AU_OM_r1_5.indd 12
7
8
8
9
* NOTE: There is no hardware for this step.
A
Attach PEDAL STRAPS (7) to PEDALS (8).
B
Attach the RIGHT PEDAL to the RIGHT CRANK
ARM, tightening it CLOCKWISE with the provided
13mm/15mm flat wrench.
C
Attach the LEFT PEDAL (8) onto the LEFT
CRANK ARM (9), tightening it COUNTER-
CLOCKWISE with the provided 13mm/15mm flat
wrench. (NOTE: The left crank arm is reversed
threaded so it is very important that it is tightened
counter-clockwise. Tightening it the opposite way
can damage the pedal or the crank arm or both.)
D
Connect the CONSOLE CABLES (6) and carefully
tuck them into the CONSOLE MAST (5).
E
Attach the CONSOLE (10) to the CONSOLE
MAST (5) using the 4 PRE-ATTACHED SCREWS
(11) (The screws will have to be removed from the
console first).
5/12/14 11:12 AM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7.3ar

Table des Matières