MITACA IM9 Mode D'emploi page 26

Problem
No beverage comes
out when the coffee
dispensing button
(A-B) is pressed.
The capsule is not
ejected
The lever (1) will not
slide properly
Solution
1) Fill the tank with water
2) Check if the water tank is well located
3) Discharge air by lifting the lever, remove the
capsule and close the lever. Wait a few seconds
for the pump to cool down.
Press the beverage dispensing button (A-B)
4) Empty the capsule receptacle and reset the
coffee function: turn the machine off and on
again switching the main switch (9) off and on
Close the lever (1), then slowly open it again
Press the dispensing button (A-B) and slowly open the lever (1) while
the water is being dispensed.
Press the dispensing button (A-B) and slowly close the lever (1) several
times while the water is being dispensed.
24
19