Electrical Connection - ROBLIN COSMOS Mode D'emploi

• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3
mm..
• Before carrying out any operation the Hood
must be disconnected by removing the plug
from the power socket or turning off the main
switch.
• From the inside of the hood canopy connect up
the power supply cable.
• Open the terminal box by unfastening the
screws on cover (A), connect the power supply
to the wiring in the box and then close the cover
again.
• Fix the Charcoal Filter on the Metal grease
filters like as indicated in picture.
EN

ELECTRICAL CONNECTION

2
22