Charging The Battery; Removing / Inserting The Battery - Grizzly ART 4032 Lion Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.

Charging the battery

The rechargeable battery and its
charger are not included.
If you own another device from the
Grizzly Battery 40 V range and the
corresponding battery, you can use
the same battery for this device.
The following devices are compatible:
Cordless Hedge Trimmer
AHS 4055 Lion
Cordless leaf blower
ALS 4025 Lion
Cordless chainsaw AKS 4035 Lion
Cordless Lawn Trimmer
ART 4032 Lion
Akku Sense AS 4026 Lion
Cordless lawn mower
ARM 4041 Lion
Cordless lawn mower
ARM 4046 A-Lion
Otherwise, please contact the
Service Centre (cf. Spare parts/
accessories). You can order the
rechargeable battery and the
corresponding charger from them.
Do not expose the battery to
extreme conditions such as heat
or impact. Risk of injury from
escaping electrolytic solution!
After eye/skin contact, rinse the
affected areas with water or a
neutraliser and consult a doctor.
Charge the battery in a dry room
only.
Prior to attaching the charger,
check that the battery's outer sur-
face is clean and dry.
There is a risk of injury due to elec-
tric shock.
Only use the original charger from
the package to charge the battery.
Mind not to charge the appliance
for more than 8 hours at a time. If
you do, the battery and the appli-
ance may be damaged and longer
charging times would be a waste
of energy. Excessive charging will
void the warranty.
Charge the battery before the first
time of use. Do not briefly charge
the battery several time in a row.
Recharge the battery when you
notice that the appliance is beco-
ming slower.
If a fully recharged battery lasts
for considerably shorter operating
times, the battery is used up and
needs to be replaced. Only use an
OEM spare battery available from
our Customer Service.
Always take heed of the applicable
safety instructions as well as the
environmental protection regulati-
ons and information.
The warranty excludes all defects
caused by improper handling.

Removing / inserting the battery

1. To remove the battery (16) from
the appliance, press the release
button (18) on the battery and
pull out the battery.
2. To insert the battery (16) place it
on the guide track (21) and push
it back into the appliance. It will
audibly snap in.
GB
65

Publicité

Table des Matières
loading

Table des Matières