Frost Protection - Kärcher Tornado BR Trike Notice D'installation

Operating Instructions BR/BD Trike
Replacing the roller brushes
n Loosen the wing nuts.
n Remove the bearing cover.
n Remove both roller brushes, insert new
ones (note hexagon fixtures for the roller
brushes).
n Attach bearing cover.
n Tighten the wing nuts.
Replacing disc brushes
n Raise the disc brushes.
n Rotate disc brushes by approx. 45° in an
anti-clockwise direction.
n Pull down and remove disc brushes.
n Insert the new disc brushes in reverse
sequence.
16
Maintenance agreement
To ensure that the unit operates reliably,
maintenance agreements can be
concluded with the appropriate Kärcher
sales office.

Frost protection

If there is a risk of frost
n Drain the fresh-water and dirty-water
tanks.
n Put the unit in a room which is protected
from frost.
Transportation
Risk of injury!
!
The unit may be loaded and
unloaded on max. 10 % inclines only.
n If transporting the unit by vehicle, secure
the unit with tension belts/ropes to
prevent it from sliding.
n Raise the cleaning head to prevent
damage to the brushes.
BD Trike
n Remove the disc brushes from the brush
head.
English