Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions BR/BD Trike
Adding detergent
Caution!
Use the recommended detergents
only. If other detergents are used, the
operator increases the risk of malfunctions
and accidents.
Detergents must not contain solvents,
hydrochloric acid or hydrofluoric acid.
Information:
i
Do not use detergents which foam
vigorously.
Before switching on the unit for the first
time, completely fill the fresh-water tank in
order to vent the water line system.
Working without recycling
If cleaning in hygienic areas (e.g. hospitals,
food companies) and if giving very dirty
floors a basic cleaning.
n Open the threaded plug on the fresh-
water tank.
n Fill with fresh water (maximum 60 °C)
up to the lower edge of the filler inlet
n Add detergent.
Comply with the metering information.
n Close the threaded plug on the fresh-
water tank.
12
Working in recycling mode (optional)
For cleaning slightly to normally dirty floors.
Detergent and setting-up times are
reduced in recycling mode.
n When the fresh-water tank is empty and
the dirty-water tank is full, set the rotary
knob to recycling mode.
Information:
i
Dirty water is filtered before being
reused.
Recycling mode requires a feed pump
which conveys the fresh and recycled water
to the brushes.
If the fresh water goes directly into the dirty-
water tank, recycling mode can be actuated
at the start of the cleaning process.
Recommended detergents
Application:
Maintenance cleaning
(also for alkaline-sensitive
floors)
Cleaning greasy dirt
deposits
Basic cleaning
(stripping) alkaline-
resistant hard floor
coverings
Basic cleaning
stripping linoleum
Sanitary cleaner
Disinfectant cleaner
Detergents are available from specialist
outlets.
English
Detergents
RM 745
RM 746
RM 69 ES ASF
RM 69 ASF
RM 752
RM 754
RM 25 ASF
RM 732
Publicité
Table des Matières
