Switching On And Off; Adjusting The Brightness; Replacing The Illuminants; Replacing The Magnifying Lense - Goobay 45274 Mode D'emploi

4.5

Switching on and off

Risk of Fire due to open cover flap
• ALWAYS Close cover flap when not in use!
I = ON
0 = OFF
Fig. 8: Switching on and off
Disconnect the LED Magnifying lamp when not in use for longer

4.6 Adjusting the brightness

Models 45274 offers a touch sensor, controlling the brightness within 5 brightness
levels.
Fig. 9: Adjusting the brightness

4.7 Replacing the illuminants

The illuminants are NOT replaceable.
4.8

Replacing the magnifying lense

4.8.1 Model 45274

4.8.2 Model 77452

The magnifying lens is not replaceable.
darker
1. Switch off the LED Magnifying lamp.
2. Set the LED Magnifying lamp horizontally
with cover flat upwards
3. Turn the magnifying lens fixation anti-
clockwise by hand until loosened and take it
off.
4. Replace the magnifying lense.
For reassembling, follow steps 1-3 in reversed
order.
brighter
time.
15