Publicité
TFA No. 35.1065 Anleit_11_20
Indoor weather station
Operation
• Open the battery compartment and insert the battery (1x 1.5 V
AAA), polarity as illustrated. The unit is now ready to use.
Display mode
• In normal mode the left row shows the weather symbol, the mid-
dle row the time in hours and minutes and the alarm and/or chime
symbol (in case), the right upper row the date and humidity, the
lower row the day of the week and the temperature.
• By pressing the °C/°F button the temperature unit can be changed
from °C to °F.
• To enter alarm mode, press the MODE button. The alarm time is
displayed.
• To enter calendar mode, press 2 x the MODE button. The year is
displayed.
Setting mode
• Press the SET button for 2 sec. to enter the respective setting mode
and select all settings one after the other.
• When the digits are flashing set the desired time by pressing the
ADJ button. Hold and press the button for a fast count.
A. Setting of the clock
Press the SET button (2 sec.) → Select 12 or 24 hours system
Press the SET button
Press the SET button
Press the MODE button
B. Setting of alarm
Press the MODE button
Press the SET button (2 sec.) → Select Alarm time Hours
Press the SET button
Press the MODE button
C. Setting of calendar
Press the MODE button
Press the SET button (2 sec.) → Select Date Year
Press the SET button
Press the SET button
Press the MODE button
8
19.11.2020
17:48 Uhr
Seite 5
by pressing the ADJ button
→ Select Time Hours
by pressing the ADJ button
→ Select Time Minutes
by pressing the ADJ button
→ Exit setting mode
→ Enter Alarm mode
by pressing the ADJ button
→ Select Alarm time Minutes
by pressing the ADJ button
→ Exit setting mode
→ Enter Calendar mode
by pressing the ADJ button
→ Select Date Month
by pressing the ADJ button
→ Select Date Day
by pressing the ADJ button
→ Exit setting mode
Indoor weather station
Activate / turn off alarm
• To activate / turn off the alarm and/or chime function, press the
ADJ button in alarm mode.
The respective symbol appears or disappears on the display.
• Press any button to stop the alarm.
Snooze function
• Once the alarm starts to ring, you can activate the snooze function
by pressing the SNZ button. The snooze symbol appears on the dis-
play. The alarm will be interrupted for 5 minutes.
MAX / MIN values
• Press the ADJ button in normal mode and the highest temperature
and humidity values are displayed since the last reset.
• Press the ADJ button again, the display shows the lowest values
since the last reset.
• Press and hold the ADJ button to reset the MAX/MIN values to the
present temperature and humidity.
Weather forecast
• The instrument has no atmospheric pressure sensor. The weather
forecast is based on the changes of humidity values.
Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the battery if you do not use the product for a lengthy
period.
• Keep the instrument in a dry place.
Battery replacement
• Replace the battery when the display becomes weak or the alarm
level declines.
Troubleshooting
Problems
Solution
➜ Ensure the battery polarity is correct
No indication
➜ Change the battery
➜ Change the battery
Incorrect display
Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose empty batteries and rechargeable batteries
in household waste.
9
Publicité
