Folding The Scooter - GLOBBER ONE K Manuel D'utilisation

ENGLISH
5 - UNFOLD THE SCOOTER
1. Pull the steering column up while pressing
down the rear wheel fender.

6 - FOLDING THE SCOOTER

1. Slide the fixing ring to the left.
4. Align the hook with the hole in the rear fender and
press down to lock the scooter in the folded position.
8
2. Open the safety latch.
Be careful when folding and unfolding to not pinch your fingers.
2. Unfold the steering column, lock the
safety latch, and slide the fixing ring over the
safety latch.
4. Tighten the handles onto the handlebars
(pay attention to the direction of rotation
when tightening).
3. Lower the steering column.
Your electric scooter is now ready to be stored or
transported.
3. Fix the brake lever with hex wrench (M5
supplied).
5. Depending on the vibration experienced by
the steering column, correctly adjust the screw
of the safety latch.