Grundig PS5110 Mode D'emploi page 20

OPERATION­_______________________________
Operating­as­a­body­analyser
The measurement and data is transmitted through
your bare feet, which are postioned on the mea-
suring electrodes . Therefore, ensure that both
A
feet are placed on the scales properly.
Entering­your­data
When you use the body composition analysis
function for the first time, select the following data
and then enter the following information: your
user parameter (from 01 to 12), your gender,
your height (75 – 215 cm), your age (10-99)
and activity level (select from A 1 to A 4).
Notes
After entering the initial data, you will not have
7
to press the
C
you use the scales. Simply select the corre-
sponding parameter (01 to 12) using the
▲ and buttons.
▼
D
During data entry, if no button is pressed for
7
more than 20 seconds, the scales automati-
cally switches off. You must then start from the
beginning.
Entering­parameters­
1­­ P osition the scales on a smooth, flat surface
and activate it. To do this, tap your foot once
on the scale in the bottom right corner of the
glass surface .
F
– Display: » « appears on the LCD screen
888
.
E
2­­ P ress the button as soon as »
C
appears in the display.
– Display: » « flashes.
20 ENGLISH
button again the next time
888
0. 0
Note
The selection 01 is described below as an ex-
ample.
01
3­­
S elect the desired user parameter (01 to 12)
using the
confirm your selection with the
– The symbol
B
01
4­­
C onfirm the selection of a male user with the
button.
C
– Display: The height flashes.
01
5­­
S et the height with the
buttons and confirm your selection with the
button.
C
– Display: The age flashes.
kg«
01
and ▲
▼
B D
flashes.
A 1
170 30
CM AGE
CM
A 1
170
CM AGE
CM
▼
B
A 1
169
CM AGE
CM
buttons and
button.
C
AGE
30
AGE
and ▲
D
30
AGE