Identification; Safety; Designated Use En; Responsibilities Of The User En - Abicor Binzel ABIDRIVE CW Mode D'emploi

TIG cold wire feeder

1 Identification

The ABIDRIVE CW is a wire feeder. It is used in industry for delivering welding filler materials for manual
and automatic TIG cold-wire welding processes. The most important components of the ABIDRIVE CW are
the wire feed with separate power supply, the wire spool and the control modules integrated into the
housing. These operating instructions only describe the ABIDRIVE CW.
1.1 CE marking
This device fulfils the requirements of the relevant EU directives.

2 Safety

The enclosed safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the purpose described in these
instructions in the manner described. In doing so, observe the operating, maintenance and servicing
conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.
2.2 Responsibilities of the user
• Keep the operating instructions within easy reach at the device for reference and enclose the operating
instructions when handing over the product.
• Putting into operation, operating and maintenance work may only be carried out by qualified
personnel. Qualified personnel are persons who, based on their special training, knowledge,
experience and due to their knowledge of the relevant standards, are able to assess the tasks assigned
to them and identify possible dangers (in Germany see TRBS 1203).
• Keep other persons out of the work area.
• Please observe the accident prevention regulations of the country in question.
• Ensure good lighting of the work area and keep the work area clean.
• Occupational health and safety regulations of the country in question. For example, Germany:
Protection Law and the Company Safety Ordinance
• Regulations on occupational safety and accident prevention.
2.3 Personal protective equipment (PPE)
To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves, and
safety shoes.
Conformity is confirmed by the CE marking on the device.
1 Identification
EN - 3