How To Use; Getting Started; Using Your Blender - Black & Decker BL1200 Serie Guide D'utilisation Et D'entretien

HOW TO U SE
This product is for household use only.
G E T T ING STARTE D
• Remove all packing material, any stickers from the product, and the
plastic band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/applica to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BLENDER JAR ASSEMBLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
Caution: Blades are sharp. Handle carefully.
3. Place jar base onto jar and rotate clockwise until it is tight.
4. Turn assembled jar right side up.
5. Place dual-opening lid on blending jar.
Note: Make sure the pour spout and ingredient slot are closed.
6. Unwrap power cord from storage area under the base.
7. Place jar assembly on base. (B).
8. Blender is now ready for use.

USING YOUR BLENDER

Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
Note: You must always add a liquid before blending.
3. Place lid on jar. Make sure the pour spout and ingredient slot are closed.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task.
(See SPEED CHART)
6. When blending thick mixtures, such as smoothies and
milkshakes, press the Hi Pulse button for several seconds,
then release. Repeat until food has desired consistency. (C)
5