Fellowes Powershred 79Ci Mode D'emploi page 3

BASIC SHREDDING OPERATION
PAPER OR CD/CARD
1
Continuous operation:
Up to 20-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Plug in and put
Continuous operation beyond
disconnect power
20-minutes will trigger
switch in ON (I) position
30-minute cool down period.
ADVANCED PRODUCT FEATURES
Jam Proof System
Eliminates paper jams and
powers through tough jobs.
JAM PROOF SYSTEM OPERATION*
Eliminates paper jams and powers through tough jobs.
Advanced Jam Prevention- Electronically
1
measures paper thickness to prevent paper jams:
If a misfeed
occurs:
*100% Jam Proof when used in accordance with user manual
SET-UP AND TESTING
1 2
Turn the shredder ON Touch test area and
( ) to activate SafeSense
look for the SafeSense
®
indicator to illuminate
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
2
Press ( ) ON to
activate (blue)
SafeSense ® Technology
Stops shredding immediately when
hands touch the paper entry.
Up to RED: Too many
sheets have been inserted.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
All indicators light up and
shredder pauses for 3-6 seconds
SAFESENSE ® TECHNOLOGY
Stops shredding immediately when hands touch the
paper opening.
3 4
SafeSense is active and If hand is held on SafeSense
®
working properly area more than 3 seconds
®
shredder will shut off
3 4
or
Feed paper straight into To shred CDs rotate
paper entry and release CD flap into place
SilentShred™ Technology
without noisy disruptions.
2
Remove several sheets until
indicator is below red.
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
standby mode and sleep mode.
WHEN IN SLEEP MODE
1
®
In sleep mode
5
6
Hold CD/card at edge, When finished
feed into CD/Card flap shredding set
entry and release to OFF ( )
Energy Savings System
Optimal energy efficiency 100% of
the time – in use and out of use.
3
Continue 100% Jam
Proof Shredding
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
ENERGY SAVINGS SYSTEM
Optimal energy efficiency 100% of
the time – in use and out of use.
2 3
or
insert paper
To get out of sleep mode
touch control panel
3 3