Siemens sipart ps2 NCS Mode D'emploi page 55

Operating Instructions
NOTE
Adjust the height of the NCS mounting kit such that the horizontal lever
position is reached as close as possible to the center of the stroke. You
can use the lever scale of the actuator for orientation. If a symetrical
assembly is not possible: it must always be guaranteed that the horizontal
lever position is passed through within the stroke range.
If you want to retrofit a SIPART PS2 positioner, install the EMC filter module
in the SIPART PS2 positioner according to the enclosed installation
instructions.
NCS
A5E00097485-06
Preparing for Operation
53