Erreka TEMIS Série Guide Rapide D'installation Et Programmation page 6

A
B
Please make sure B and A are similar or the same in value that the leaves can be operated smoothly, also to
reduce the burden of the motor.
Unlocking for manual operation:
1. Insert the key to the release slot.
1
2. Turn counterclockwise to release the motor.
Place the two brackets on the surface and the
1
position where they will be installed, please make
sure that the front bracket is installed completely
horizontally.
2
Assembly levels, outward opening
2
1
Unlocking
Motorised operation locking:
1. Insert the key and turn clockwise .
1
2. Remove the key.
Assembly
Place the motor on rear bracket with screw (A) and nut (B).
2
A
B
Open exterior
1
2