TOPCOM Axiss 130
7
Indirect Memory numbers
7.1
Programming Indirect memory numbers
You can program 10 Indirect (0-9) memory numbers (number: max 16 digits).
•
Enter the desired telephone number.
•
Press the Store
•
Enter the indirect memory number (0-9).
•
The display will show '-------------' if the number stored.
Note: The Redial button can be used to add a 3 seconds pause between the numbers.
7.2
Saving a number from the Call List as a Indirect Memory number
•
Select the number out of the call list with the Up
•
Press the Store
•
The SWAP icon appears on the display.
•
Enter the indirect memory number (0-9).
•
The display will show '-------------' if the number is stored.
7.3
Calling an Indirect Memory number
•
Pick up the handset.
•
Press the Memory button
•
The stored number will be dialed automatically.
8
Technical data
Dialing options: DTMF (tone)
Batteries: 3 x 1.5V, AAA Non-rechargeable
Ambient temperature: +5 °C to +45 °C
Permitted relative air humidity: 25 to 85 %
9
Cleaning
Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or
abrasive solvents.
10 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution
to the protection of the environment. Please contact your local authorities in case you need more
information on the collection points in your area.
Batteries must be removed before disposing of the device.
Dispose of the batteries in an environmental manner according to your country regulations.
6
button.
button.
followed by the Indirect Memory number (0-9) to call a number.
and Down button
.
TOPCOM Axiss 130