Attaching The Belt Clip - Albrecht AE33 H Mode D'emploi

WARNING!
If you connect an external speaker to the scanner's headphone jack,
please take care that both of the 2 wires are insulated from any power
supply or ground system (like car body). Double grounding might
damage the scanner.

ATTACHING THE BELT CLIP

To make your scanner easier to carry when you are on the go, use the
supplied belt clip. Slide the belt clip into the hanger piece on the back of
the scanner. To remove, slide up the belt clip pulling the pinch at the
middle of the belt clip.
40
Pinch
English