SETTING UP YOUR SCANNER
•
Install three batteries in the compartment as indicated by the
polarity symbols (+ and -) marked inside.
•
Replace the cover.
USING RECHARGEABLE BATTERIES
You can also use three rechargeable batteries (Ni-MH) to power
your scanner. Before you use rechargeable batteries, make sure
the batteries are fully charged.
CAUTIONS:
•
Use only fresh batteries of the required size and recommended
type.
•
Always remove old or weak batteries. Batteries can leak
chemicals that destroy electronic circuits.
•
Do not mix old and new batteries, different types of batteries
(standard, alkaline, or rechargeable), or rechargeable batteries
of different capacities.
38
English