Bluetooth; Factory Reset - Marshall CODE 100 Manuel Du Propriétaire

STORING A PRESET (CONT.)
The Section Switches act as naming shortcuts:
NAMING SHORTCUTS
PRE FX
Clear
AMP Number
MOD Upper / Lower Case A
DEL
Upper / Lower Case
REV Space
POWER Backspace
CAB
Cancel
• To complete the store process, press & hold EXIT/STORE once more until STORED
appears on the display screen. Your edited Preset has now been stored to CODE's
memory.

BLUETOOTH

Pressing REV and POWER Section Switches together (#19 & #20 in this manual) accesses
the Bluetooth pairing function:
®
• The display screen will show 'Bluetooth:' with your CODE amplifier's
pairing ID.
• The blue LED on EXIT/STORE (#22 in this manual) will flash while pairing.
• When paired, the blue LED will stop flashing and remain lit.
• When streaming audio, use the MASTER volume control or your music player to set the
volume level.
Streamed audio will bypass CODE's panel features, with the exception of MASTER
!
volume.
The Marshall Gateway™ App enables you to control your CODE amplifier remotely using
your iOS or Android device. Create a Marshall Cloud profile and sync your device to
manage your Preset library online. You can share your Presets, access featured Presets,
join the conversaion on the CODE Forum and more. Register and become part of the
CODE online community at: my.marshall.com. Download Marshall Gateway now from the
App Store or Google Play.
ENGLISH
GUITAR TUNER
Pressing the PRE FX and AMP Section Switches (#15 & #16 in this manual) together
accesses the guitar TUNER:
• Pluck a string and the note you are playing will display.
• Tune the string until the name of the note you wish to tune to appears on the screen.
• The bar will move to the left if the note is flat. The bar will move to the right if the note is
sharp.
• When the bar is dead centre, that string is tuned to the displayed note.
• Press EXIT/STORE to exit the Tuner.

FACTORY RESET

Performing a factory reset will return CODE's Presets back to when it was new.
Before performing a factory reset, be sure that you want to overwrite all of your personal
!
Presets.
To perform a factory reset:
• Power OFF the amplifier using the ON/OFF switch (#14 in this manual).
• Whilst holding down the AMP Section Switch, turn the power ON.
• The screen will display a notification that the amplifier is about to be returned to its
factory settings.
• If you are sure that you want to perform a factory reset, press and hold the EXIT/STORE
switch to confirm (#22 in this manual).
• If you do not want to restore the factory presets, pressing any other switch will cancel the
factory reset operation and boot the amplifier as normal.
ENGLISH
A: >>|<< A: >>|< A: >>|< A: >>|<