URBANGLIDE EBIKE M1 Manuel D'utilisation page 13

Settings
To enter the advanced settings of your bike, press and hold the 'Menu' button on the remote
control within 10 seconds of turning on your display.
To change the unit of measurement press 'Up' and 'Down' to change from km/h to MPH.
The other settings are predefined by the manufacturer. They ensure a safe product that
complies with European regulations. Only authorised persons (repair shops, cycle professionals
and bicycle dealers) are allowed to modify these settings. If you modify them yourself, your
warranty will be void.
ATTENTION: You can only use the display and its functions when the battery is switched
on in your bike and is charged.
•
DATA RESET
To reset your bike's information such as average speed, max speed, mileage, follow these steps.
10 seconds after turning on your screen, hold down the "Menu" button. When your data is
flashing, briefly press the "Menu" button to clear the data. If you do not wish to clear the data,
do not press any buttons and wait for the interface to close itself.
13