Product View - Bissell 38B1 Série Mode D'emploi

Product View

1 Hand Grip
2 Cord Wrap
3 Power Cord
4 Handle
5 Quick Release Handle
6 Hand Vacuum Grip
7 Power Switch
8 Dirt Container Latch
9 Filter
10 Dirt Container
11 Removable Floor Nozzle
12 Date code and serial number
Operati s
How to use your vacuum
Your 3-in-1 vacuum may be used in one of three
ways. See instructions below for converting your
vacuum to best meet each need.
1. As a Floor Vacuum:
a. Open the latch at the base of the hand
vacuum grip and insert handle. Once handle
is all the way inserted into the body of the
vacuum, press the latch closed to secure the
handle in place.
b. Attach the floor nozzle by inserting it
into the opening at the bottom of the dirt
container. Press firmly to secure in place.
2. As a Hand Vacuum:
Release the latch from the handle and pull handle
away from the unit. Press the latch closed.
3. As a Multi-Purpose Vacuum:
The floor nozzle may be used with the hand
vacuum to clean large surfaces. To attach the
floor nozzle to the hand vac, insert it into the
opening a the bottom of the dirt container.
Press firmly to secure in place.
www.BISSELL.ca
4
1
2
3
WARNING
4
Plastic fi lm can be dangerous. To avoid
danger of su ocation, keep away from
babies and children.
5
WARNING
6
Do not plug in your vacuum cleaner until
7
you are familiar with all instructions and
operating procedures.
8
WARNING
9
To reduce the risk of electric shock, turn
power switch o and disconnect polarized
10
plug from electrical outlet before performing
12
maintenance or troubleshooting checks.
11
WARNING
Do not operate cleaner with damp or wet fi lters
or without vacuum bags and all fi lters in place.
1a. 1b.
2. 3.