Maintenance/Care - Warn 70326 Instructions De Montage

WARNING
READ THE VEHICLE'S OPERATOR MANUAL,
WINCH OPERATOR MANUAL, AND ALL WARN-
ING LABELS PRIOR TO OPERATION OF ATV
AND WINCH.
THE WINCH MOUNTING PLATE INSTALLATION IS NOW COMPLETE.
• Assemble winch and fairlead to mounting plate, using hardware found in winch kit.
• Wire winch according to instructions found in winch kit.
PROCEED TO SECTION VI TITLED "MAINTENANCE/CARE".
WARNING
FAILURE TO SECURELY TIGHTEN ALL BOLTS
ON THE WINCH PLATE, WINCH, AND FAIRLEAD
CAN RESULT IN PRODUCT FAILURE WHICH MAY
RESULT IN VEHICLE DAMAGE AND OPERATOR
INJURY OR DEATH. DOUBLE CHECK THAT ALL
BOLTS ARE SECURELY TIGHTENED PRIOR TO
USE.
VI. MAINTENANCE/CARE
1. Inspect all parts on the winch, winch mount, and related hardware prior to each use. Replace all hardware that
appears rusted or deformed.
2. Inspect all nuts and bolts on the winch, winch mount,, and related hardware prior to each use. Tighten all nuts that
appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced.
3. Check all cables prior to use. Replace cables that look worn or frayed.
4. Check all moving or rotating parts. Remove debris that may inhibit the part from moving freely.
PERFORM REGULAR INSPECTIONS ON THE WINCH, WINCH MOUNT, AND RELATED HARD-
WARE. NEVER OPERATE THE WINCH WITH DAMAGED OR MISSING PARTS. FAILURE TO
FOLLOW THIS WARNING MAY CAUSE VEHICLE DAMAGE AND OPERATOR INJURY OR DEATH.
WARN INDUSTRIES
©2009 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
WARNING
PAGE 4 70323A3