Operating Manual; General; Information In This Manual; Warning Notices - CASO DESIGN Fomini Crema Inox Manuel D'utilisation Original

1 Operating Manual

1.1 General

Please read the information contained herein so that you can become familiar with your device
quickly and take advantage of the full scope of its functions.
Your Fomini Crema / Fomini Crema Inox will serve you for many years if you handle it and
care for it properly. We wish you a lot of pleasure in using it!

1.2 Information in this manual

These Operating Instructions are a component of the Fomini Crema / Fomini Crema Inox
(referred to hereafter as the device) and provide you with important information for the initial
commissioning, safety, intended use and care of the device.The Operating Instructions must
be available at all times at the device. This Operating Manual must be read and applied by
every person who is instructed to work with the device:
 Operation
Keep the Operating Manual in a safe place and pass it on to the subsequent owner along with
the device.

1.3 Warning notices

The following warning notices are used in the Operating Manual concerned here.
Danger
A warning notice of this level of danger indicates a potentially dangerous situation.
If the dangerous situation is not avoided, this can lead to death or serious injuries.
► Observe the instructions in this warning notice in order to avoid the danger of death or
serious personal injuries.
Warning
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to serious injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Attention
A warning notice of this level of danger indicates a possible dangerous situation.
If the dangerous situation is not avoided, this can lead to slight or moderate injuries.
► Observe the instructions in this warning notice in order to avoid the personal injuries.
Please note
A notice of this kind indicates additional information, which will simplify the handling of the
machine.
 Troubleshooting and/or
 Commissioning
 Cleaning
4