After-Sales Service And Application Service; Français; Consignes De Sécurité - Bosch GTC 600 C Professional Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
When cleaning the measuring tool, ensure that no liquids
enter the tool.
Do not attempt to remove dirt from the infrared sensor (23),
camera (24), speaker (18) or microphone (15) using sharp
objects. Do not wipe over the infrared sensor and camera
(risk of scratching).
Please contact an authorised Bosch after-sales service
centre if you want to have your measuring tool recalibrated.
If repairs are required, send in the measuring tool in its ori-
ginal packaging.
There are no parts which can be serviced by the user on the
measuring tool. Opening the housing shell can destroy the
measuring tool.
Changing the Button Cell (see figure B)
Unscrew the screw (4) on the button cell holder. Pull the
button cell holder (2) out of the measuring tool with an auxil-
iary tool (e.g. a flat-head screwdriver). Change the button
cell. Retighten the screw (4) after inserting the button cell
holder.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Bosch Power Tools
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Measuring tools, rechargeable/non-rechargeable
batteries, accessories and packaging should be
sorted for environmental-friendly recycling.
Do not dispose of the measuring tools or re-
chargeable/non-rechargeable batteries with
household waste.
Only for EU countries:
According to the Directive 2012/19/EU, measuring tools
that are no longer usable, and according to the Directive
2006/66/EC, defective or used battery packs/batteries,
must be collected separately and disposed of in an environ-
mentally correct manner.
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 25).
Français
Consignes de sécurité
Prière de lire et de respecter l'ensemble des
instructions. En cas de non-respect des pré-
sentes instructions, les fonctions de protec-
tion de l'appareil de mesure risquent d'être
altérées. BIEN CONSERVER LES PRÉSENTES INSTRUC-
TIONS.
Ne confiez la réparation de l'appareil de mesure qu'à
u
un réparateur qualifié utilisant uniquement des pièces
de rechange d'origine. La sécurité de l'appareil de me-
sure sera ainsi préservée.
Ne faites pas fonctionner l'appareil de mesure en at-
u
mosphère explosive, en présence de liquides, gaz ou
poussières inflammables. L'appareil de mesure peut
produire des étincelles susceptibles d'enflammer les
poussières ou les vapeurs.
N'ouvrez pas l'accu. Risque de court-circuit.
u
Si l'accu est endommagé ou utilisé de manière non
u
conforme, des vapeurs peuvent s'échapper. L'accu
peut brûler ou exploser. Ventilez le local et consultez un
médecin en cas de malaise. Les vapeurs peuvent entraî-
ner des irritations des voies respiratoires.
En cas d'utilisation inappropriée ou de défectuosité de
u
l'accu, du liquide inflammable peut suinter de l'accu.
Évitez tout contact avec ce liquide. En cas de contact
Français | 25
1 609 92A 4UF | (14.01.2021)

Publicité

Table des Matières
loading

Table des Matières