Control Panel - Kuppersbusch IKE2480-1 Notice D'utilisation

14
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban
refuse and rubbish. The insulation foam
contains flammable gases: the appli-

Control panel

1 ON/OFF button
2 Display
3 Temperature warmer button
4 Temperature colder button
5 OK button
Display
1 Timer function
2 Intensive Cooling function
3 Drinks Chill function
4 Holiday function
5 Child Lock function
6 Alarm indicator
7 Temperature indicator
Switching on
To switch on the appliance do these steps:
1. Connect the mains plug to the power
socket.
2. Press the ON/OFF button if the display
is off.
3. The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
1 2
Functions
6 5
6
It is possible to change predefined sound of
buttons to a loudly one by pressing togeth-
er Functions button and Temperature cold-
er button for some seconds. Change is re-
versible.
1 2 3 4 5 6
4. The temperature indicators show the
To select a different set temperature refer to
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1. Press the ON/OFF button for 5 sec-
2. The display switches off.
3. To disconnect the appliance from the
Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature but-
ton.
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
are recyclable.
by the symbol
4 3
Functions button
7
If "dEMo" appears on the Display, the
appliance is in demonstration mode: re-
fer to "WHAT TO DO IF..." paragraph.
set default temperature.
onds.
power disconnect the mains plug from
the power socket.