AEG Prism 15 Mode D'emploi page 8

8
6.2 Base Station Overview(see P4)
12
13
INDICATOR
LIGHT
CHARGING
14
CRADLE
6.3 Handset LCD Display Icons and Symbols(see P2)
The LCD display gives you information on the current status of the
telephone.
Displays when the handset is registered and within range
of the base station, with more blocks indicating a stronger
signal.
Indicates the handset is on a call.
Flashes when there is an incoming call.
Indicates the handset ringer is switched off.
Indicates an alarm is set.
sounding.
Indicates the keypad is locked.
Indicates the battery is fully charged.
Battery segments cycle during charging.
Indicates the battery needs charging. Flashes when
low battery power level is detected. (Note: the handset
backlight will not turn on when the battery is low.)
Indicates a new TAM message is playing or a new call is
being viewed in the calls list.
Indicates the speakerphone is turned on.
• PAGE - Press to page your handset(s).
• Press and hold to enter registration
mode
• On when the answering machine (TAM) is
ON
TAM
• Flashes if new TAM messages are
recorded, when the TAM is being used,
or when there is incoming ringing.
• Handset cradle for battery charging.
Flashes when the alarm is