Functional Designation - Chauvin Arnoux STATOP 4841 Mode D'emploi

3. FUNCTIONAL DESIGNATION

OUT
H
100
200
300
0 L
°C
STATOP 4842
Button for adjustment of the setpoint temperature
Temperature scale of the controller (self-adhesive dial)
Dual-colour «OUT» indicator:
- red, indicates that the controller is outputting power (heating)
- green, indicates that the control output is inactive
Red indicator «H» (STATOP 4842 only):
indicates that the temperature measured is greater than the value of the setpoint
- lit continuously: low excess (< 1.5%)
- flashing: high excess (>1.5%)
Green indicator «L» (STATOP 4842 only):
indicates that the temperature measured is less than the value of the setpoint
- lit continuously: low excess (< 1.5%)
- flashing: high excess (>1.5%)
18