Warranty; Pre-Installation; Planning Installation; Tools Required - ETI Solid State Lighting 54296146 Guide D'utilisation Et D'entretien

Warranty

This product is warranted for a period of 5 years from the date of original purchase against defects in materials and workmanship. If this
product should fail to operate due to defects in material or workmanship within 60 months of purchase, see www.ETiSSL.com for details.
This product will be repaired or replaced, at ETi's option. This warranty is expressly limited to repair or replacement of product and liability
for direct, incidental, or consequential damages is hereby expressly excluded. Some states do not allow exclusions of direct, incidental or
consequential damages, so the above limitation of exclusion may not apply to you. This warranty gives the consumer specific legal rights,
which vary from state to state. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS PRODUCT IS MANUFACTURED.

Pre-Installation

PLANNING INSTALLATION

Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service
for replacement parts.
WARNING: Shut off the power at the circuit breaker or fuse panel before removing the old fixture, ballast, or fluorescent tubes.
NOTE: Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

Wire
Strippers
Flathead
Screwdriver
Safety
Goggles
Phillips
Screwdriver
3
Ladder
Electrical
Tape
Please contact 1-855-384-7754 or further assistance.
Gloves
Wire
Cutters
WWW.ETiSSL.COM